HOME products Proxy Products FRP Rebar And Rebar Machine FRP Rebar Automatic Cutting Machine

FRP Rebar Automatic Cutting Machine

DESCRIPTION

The GFRP Rebar Pultrusion Line Rubber Haul off Machine developed by Prowell Technology can cooperate with the FRP Rebar production line to produce high-quality FRP Rebar.

The rubber block tractor we provide can be configured with frequency conversion speed regulation, pneumatic compression, high heat-resistant rubber block, dual power traction, and an effective traction length of 2.8 meters, which greatly improves the density and strength of the product.

At the same time, the FRP Rebar tractor can also be used in conjunction with the automatic cutting machine and the turning frame, which can complete high-precision fixed-length cutting, as well as 90° straight cutting and 45° oblique cutting, which greatly improves production efficiency and reduces product cost. loss.

At present, our equipment occupies a large share in China, and we also have enough experience and ability to help customers solve problems.

Product performance introduction

QG-50 FRP Rebar Automatic Cutting Machine

The cutting length of the product is ≥2 meters, and the total length accuracy is ≤0.5 cm.

Cutting Way	Saw
Saw Type	High speed steel
Air Pressure	0.4～0.7Mpa
Motor	2.2Kw
Compression method	Air
Cutting direction	From top to bottom
Cutting Range	≤φ45mm
Cutting angle	45° / 90°
Fixed-Length Cutting Way	Positioning cutting

For more details of equipment, such as: usage method, usage range, operation video,production delivery cycle, etc. You can contact us directly.
We will reply you within 8 hours of receiving the message.

FRP Rebar Automatic Cutting Machine

Series :

FRP Rebar And Rebar Machine >

application

Corrosive & marine environments, such as bridge pylons. Thermal insulation between exterior and interior. Places which should remain free of electromagnetic disturbances: MRI units, control towers, etc. Can be used in precast or cast-in-place concrete. D-Walls to ease Tunnel Boring Machines break-through, see Soft-Eye product page

inquiry

FAQ

Q : How strong is it? A : Fiberglass Rebar tends to be about double that of steel in tension. However, it does have a lower modulus of elasticity which can drive different design requirements.
Q : Can GERP rebar replace steel? A : Yes, Fiberglas Rebar absolutely can and is being used to replace steel in many structures of all shapes and sizes. However, this does not mean it can or should be used as a direct replacement. Oftentimes, depending on the demands, you may need a bit more or less Fiberglas™ Rebar. Typically, our designed are dictated by serviceability and crack widths.

Other related products

menu

products