308S Direct Roving or Assembled Roving is produced with E6 glass formulation and
coated with a silane-based sizing composition.It is specially designed for reinforcing
epoxy resin and suitable for both amine and anhydride curing systems.
The composites of epoxy resin reinforced with 308S have excellent mechanical and anti-fatigue properties.308S is suitable for high-tension winding and pultrusion processes.Typical applications include wound pipes,high pressure cylinders and pultruded profiles.
Product performance introduction
Product Features
-
Fast and complete wet-out and good bonding with resins
-
Good process performance and low fuzz
-
Suitablefor highspeed,high tension flament winding process
-
Excellent mechanical properties and fatigue resistance
-
Excellent acid corrosion resistance
Specification
Glasstype | E6 | ||
Sizingtype | Silane | ||
Typicalfilamentdiameter(μm) | 17 | 21 | 24 |
Typicallineardensity(tex) |
600/735 900/1100 1200/2400 |
2000 2100 |
2400 4800 |
Example (Direct Roving) |
E6DR17-2400-308S |
||
Example (Assembled Roving) |
E6R17-1100-308S(U) |
Technical Parameters
Item |
Linear density variation |
Moisture content |
Sizing content |
Breakage strength |
Unit |
% |
% |
% |
N/tex |
Test menthod |
ISO 1889 |
ISO 3344 |
ISO 1887 |
ISO 3341 |
Standard range |
±5(<600 tex) ±4(≥600 tex) |
≤ 0.07 |
0.55±0.15 |
≥0.40(<4800 tex) ≥0.35(≥4800 tex) |
Mechanical Properties
Mechanical properties |
Unit |
Value |
Resir |
Test menthod |
Tensile strengtt |
MPa (Ksi) |
2590.0 (375.6) |
Amine/DER331 |
ASTM D2343 |
Tensile modulus |
GPa (Msi |
82.2 (11.9) |
Amine/DER331 |
ASTM D2343 |
Shear strength |
MPa (Ksi) |
74.3 (10.8) |
Amine/DER331 |
ASTM D2344 |
Strength retention(72 hr boiling) |
% |
>96 |
Amine/DER331 |
/ |
Instructions
- The product is best used within 12 months after production, and should be kept in the original package before use.
- Care should be taken when using the product to prevent it from being scratched or damaged.
- The temperature and humidity of the product should be conditioned to be close or equal to the ambient temperature and humidity before use, and the ambient temperature and humidity should be properly controlled during the use.
-
When using the product,please control the tension properly and ensure the tension uniformity
Packaging
For detailed package size information, please download the product manual to view!
Storage
Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10℃~35℃ and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.
More products in the same series
Direct Roving for Filament Windling 308S
Series :
Fiberglass Direct Roving >application
Chemistry and Chemical / Infrastructure / Marine / Petrochemical / Building and Construction
Glass type :
E6
Sizing type :
Silane
Typical filament diameter (μm) :
17 | 21 | 24
Typical linear density (tex) :
*
Example (Direct Roving) :
E6DR17-2400-308S
Example (Assembled Roving) :
E6R17-1100-308S(U)
FAQ
Q :
Are you a factory? Where are you located?
A :
We are manufacturer of FRP grating and pultruded profiles, trader of FRP yarn materials. We are the largest distributor of China Jushi Co. We also sell products of several FRP yarn manufacturers. We are in Anhui, China.
Q :
What information is recommended for the inquiry?
A :
1. Which tex you need? 2. What the application you use it for? Or the tecnologh, is weaving, pultrusion or winding? 3. How many quantity do you need? 4. What resin do you combined for? Polyester resin or epoxy resin? 5. Do you need FOB or CIF price, if CIF, please tell us your port.
Q :
What's the MOQ?
A :
Usually 1 Ton
Q :
Package & Shipping
A :
Normal package:carton(Incuded in the unite price) Special Packge: need to charge according the actual situation. Normal shipping :your nominated Freight forwarding.
Q :
When can I offer?
A :
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
Q :
How do you charge the sample fees?
A :
If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
Q :
What's your delivery time for production?
A :
If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !
Other related products