HOME products Proxy Products Fiberglass Chopped strand Mat Emulsion Chopped Strand Mats P20

Emulsion Chopped Strand Mats P20

P20 Powder Chopped Strand Mat is made of randomly distributed chopped E-glass strands held together by a powder binder. It is compatible with unsaturated polyester, vinyl ester, and epoxy resins.

P20 is has the advantages of good conformability to molds,allowing for no springback at small angles. It is mainly designed for use in hand lay-up process to produce FRP parts with complex shapes. It can also be used to make FRP models and other common FRP parts.

Product performance introduction

Emulsion Chopped Strand Mats P20

The Emulsion Chopped Strand Mats P20 is a high-performance, chopped strand mat (CSM) designed for use in a variety of industrial applications. This product features a unique emulsion-based manufacturing process, resulting in a mat with excellent wet-out properties, high mechanical strength, and improved durability.

Key Features:

Emulsion-Based Manufacturing: The P20 mat is produced using an emulsion-based process, which involves combining glass fibers with a proprietary emulsion to create a strong and uniform mat.
Improved Wet-Out: The emulsion-based process enables excellent wet-out properties, allowing the mat to easily absorb and distribute resin evenly throughout the composite.
High-Strength Chopped Strands: The P20 mat features high-strength chopped glass strands that provide excellent mechanical properties, including tensile strength, impact resistance, and durability.
Medium Areal Weight: The P20 mat has a medium areal weight, making it suitable for applications where a balance between weight and mechanical strength is required.
Easy to Handle: The P20 mat is easy to handle and transport, reducing labor costs and improving production efficiency.
Good Drapeability: The P20 mat has good drapeability, making it suitable for applications with complex geometries.

Technical Specifications:

Areal weight: 400-500 g/m²
Thickness: 1.5-2.5 mm
Chopped strand length: 25-50 mm
Strand diameter: 13-17 μm
Material: E-glass or S-glass (optional)
Resin compatibility: Polyester, epoxy, and other common resins
Temperature resistance: Up to 150°C

Benefits:

High Mechanical Strength: The P20 mat's high-strength chopped strands provide excellent mechanical properties, including tensile strength, impact resistance, and durability.
Improved Wet-Out: The emulsion-based process enables excellent wet-out properties, resulting in faster production times and improved composite quality.
Good Balance between Weight and Strength: The P20 mat's medium areal weight makes it suitable for applications where a balance between weight and mechanical strength is required.
Cost-Effective: The P20 mat is a cost-effective solution for composite materials manufacturing, offering a competitive advantage in various industries.

Applications:

Automotive: Body panels, spoilers, dashboards, and other interior components.
Aerospace: Aircraft interior parts, such as seat components, paneling, and luggage racks.
Marine: Boat hulls, decks, and other structural components.
Wind Energy: Turbine blades, hubs, and other structural components.
Construction: Building insulation, roofing, and other structural components.

Comparison to Other Products:

The Emulsion Chopped Strand Mats P20 is similar to the E10 mat, but with a higher areal weight and slightly higher mechanical strength. It is also similar to the E20 mat, but with a lower areal weight and slightly lower mechanical strength.

Product Features

Soft mat,ease of manual tearing apart
good conformability
Good wet-through and fast wet-out in resinsLow resin consumption

Specification and Technical Parameters

ltem	Area weight variation	Moisture content	Sizing content	Tensile breaking force
Test method	ISO 3374	ISO 3344	ISO 1887	ISO 3342
Jushi standard	≤300 g/m²:±6% >300 g/m²:±5%	≤0.10 %	See table below	See table below
GB/T 17470 National standard	<300 g/m²:±12% 300～599 g/m²:±10 % ≥600 g/m²:±8%	≤0.20 %	1.8 %～8.5 %, The range should not exceed 2%	<300 g/m²:≥40 N 300～599 g/m²:≥60 N ≥600 g/m²:≥80 N

Product code	Area weight	Sizing content	Tensile breaking force	Product code	Area weight	Sizing content	Tensile breaking force
E6CRMC225	225 g/m²	4.2 %(1±31%)	≥80 N	E6CRMC450	450 g/m²	2.5 %(1±31%)	≥120 N
E6CRMC300	300 g/m²	3.2 %(1±31%)	≥100 N	E6CRMC600	600 g/m²	2.4 %(1±31%)	≥150 N
E6CRMC375	375 g/m²	2.8 %(1±31%)	≥110 N	E6CRMC900	900 g/m²	2.6 %(1±31%)	≥240 N

Instructions

The product is best used within 12 months after production, and should be kept in the original package before use.
Care should be taken when using the product to prevent it from being scratched or damaged.
The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.

Packaging

For detailed package size information, please download the product manual to view!

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10℃~35℃ and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.

More products in the same series

Fiberglass products for thermoplastics

Emulsion Chopped Strand Mats P20

Series :

Fiberglass Chopped strand Mat >

application

Chemistry and Chemical / Infrastructure / Marine / Petrochemical / Building and Construction

inquiry

FAQ

Q : Are you a factory? Where are you located? A : We are manufacturer of FRP grating and pultruded profiles, trader of FRP yarn materials. We are the largest distributor of China Jushi Co. We also sell products of several FRP yarn manufacturers. We are in Anhui, China.
Q : What information is recommended for the inquiry？ A : 1. Which tex you need? 2. What the application you use it for? Or the tecnologh, is weaving, pultrusion or winding? 3. How many quantity do you need? 4. What resin do you combined for? Polyester resin or epoxy resin? 5. Do you need FOB or CIF price, if CIF, please tell us your port.
Q : What's the MOQ? A : Usually 1 Ton
Q : Package & Shipping A : Normal package:carton(Incuded in the unite price) Special Packge: need to charge according the actual situation. Normal shipping :your nominated Freight forwarding.
Q : When can I offer? A : We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
Q : How do you charge the sample fees? A : If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
Q : What's your delivery time for production? A : If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !

Other related products