TFcomposite‘s FRP Lighting Tile is molding by the continuous mechanism with the materials of alkali free fiberglass felt, polyester resin and anti-aging pellicle. It is clean appearance, accurate measurement of profile surface, length cutting randomly. Its using lifetime of the lighting board can be 15-20 years, and aphotic rate is over 85%. It also has the characteristics of good permeability and fibre distributing averagely, comfortable temperature, tenderly lighting and low UV ray insides. Further more, its well intensity, perfect anti-impact, can pound by the hailstone but not affect the normal usage. Low heat-conducting coefficient and heat-preservation make it better to use the double deck light board in the Frigid Zone.

Description

Style: Trapezoidal/Waveform
Color: Transparent/Blue/Yellow/Red/Customized color
Thickness: 0.8mm to 6mm
Standard thickness: 1.2mm/1.5mm/2mm
Width:810~1200mm
Effect width: 760mm/840mm/920mm/930mm/1050mm/1130mm
Length: customized
Weight: 1.8-3.2KG per square meter

FRP Lighting Tile Features

1.Lightweight and high strength:
Relative density between 1.5g/cm3 to 2.0g/cm3,only carbon steel 1/4~1/5,but the tensile strength is close,even more than carbon steel,the specific strength can be compared with the high performance alloy steel.Thus,in aviation,rockets,spacecraft,high pressure vessels as well as in other products need to reduce the weight of applications,have excellent results.Some epoxy FRP tensile,bending and compression strength can reach more than 400Mpa.

2.Crossion resistance:
FRP is a good anticorrosive material,it has a better resistance for the atmosphere,water and the general concentration of acid, alkali, salt and a variety of oils or solvents. It has been applied to all aspects of chemical corrosion replacing carbon steel,stainless steel,wood,nonferrous metals and so on.

3.Good electrical performance:
FRP Is an excellent insulating material used to make insulators.It can protect the good dielectric at high frequency as well.Microwave permeability is good,widely used in radar radome.

4.Thermal performance is good:
FRP thermal conductivity is low,room temperature is 1.25 ~ 1.67kJ / (m · h · K), only metal 1/100 ~ 1/1000,is an excellent insulation material.In the case of instantaneous ultra-high temperature it is the ideal thermal protection and ablation materials,can protect the spacecraft withstand high-speed air erosion at 2000ºC or more .

5.Good designability:
It can be designed based on different need to variety of structural products to meet the requirements,the product has a good overall.FRP can be fully selected materials to meet the performance of the product, such as: you can design a product with properties like crossion resistance,resistance to instantaneous high temperature,particularly high strength in one direction, good dielectric and so on.