HOME products Main Products GRP Handrail System

GRP Handrail System
GRP Handrail System

Our GRP handrail system often used in a GRP handrail or guardrail to continue the middle rail on a 90° corner or connect vertical posts to the top rail, or to join the midrail to the end post.

Product performance introduction

	The GRP external Swivel is a versatile in-line swivel fitting, often used where angles vary on slops, steps and landings.		The GRP 116 Mid Corner is a 90° corner joint, often used in a GRP handrail or guardrail to continue the middle rail on a 90° corner, but can also be used to build rectangular or square structures. The upright passes vertically through the GRP fitting. Often used with the GRP-128 Top Corner.
	The GRP 101 Short Tee is a 90° tee connection, typically used in a GRP handrail to connect vertical posts to the top rail, or to join the midrail to the end post. The tube cannot be joined within the top of the fitting-the GRP-104 Long Tee can be used as an alternative if this is required.		The GRP Fitting 119 Midrail Cross is a 90° joint, often used to join the middle rail to an intermediate upright post in a GRP handrail or guardrail. The upright passes vertically through the GRP fitting.
	The GRP 104 Long Tee is a 90° tee connection, typically used to connect vertical posts to the top rail of a GRP handrail. The GRP -104 can be used where two lengths of tube need to be joined within the top of the fitting.		The GRP 125 fitting is a 90° elbow, often used in a GRP handrail or guardrail to connect the top rail to the upright post at the end of a run.
	The GRP 129 is a 30° tee fitting, often used in a staircase GRP handrail or guardrail.		The 128 Top Corner fitting is a 3-way. 90° elbow, typically used to join an upright post to the top rail of a GRP handrail on a 90º corner. Often used with the GRP-116 Mid Corner.
	The GRP 130 is a 30° Cross, often used to connect the midrail to intermediate posts in a staircase GRP handrail.		The GRP 116 Mid Corner is a 90° corner joint, often used in a GRP handrail or guardrail to continue the middle rail on a 90° corner, but can also be used to build rectangular or square structures. The upright passes vertically through the GRP fitting. Often used with the GRP-128 Top Corner.
	The GRP 132 Base Plate is a base flange with four fixing holes, used to fix down the upright posts in a handrail or guardrail.		The GRP 173 Single Swivel is a versatile swivel fitting, used where angles vary on slopes, steps and landings.
	The 145 Wall Socket is a GRP Fitting designed for side fixing GRP handrails or guardrails to walls, ramps and steps.		Our GRP Kick plate is 100mm wide, with a 5mm wall. It is stocked in 6m lengths but can be cut to length if required.

Made in China glass reinforced plastic (GRP),TFcomposite’s GRP handrail system offers key benefits over steel that explain why you’ll see GRP handrailing everywhere from water treatment works to the rail industry.

Once you’ve completed the simple installation – requiring only a stainless steel bolt to clamp together the fittings – your GRP handrail will provide protection for years to come, even in the most challenging environments.

5M GRP TUBE

Application:

Application Of FRP Handrail System

GRP Handrail System

Series :

Main Products >

application

Our GRP handrail system is widely used in GRP handrail and guardrail's multi-drop-and-continue cross-connection.

Brand name :
TFcomposite
Color :
yellow or grey

inquiry

FAQ

Q : What size and length does the GRP handrail tube come in? A : The GRP tube is only produced in 50mm o/d (outside diameter) and is stocked in 5m lengths. We can cut the tube down to length if needed.
Q : How are the fittings fixed to the tube? A : Fittings for GRP handrails are supplied as two identical halves which simply clamp together around the tubing. These need to be drilled onsite using a standard 9mm diameter HSS drill bit (supplied with your order) and bolted together with the special stainless steel rivnut fixings provided. The bolts are then inserted and tightened using a pozi 3 driver, the knurled rivnut fixing will hold in place whilst the bolt is tightened. These fixings provide a flush finish with no protruding bolt heads.
Q : What colours are available for GRP handrail systems? A : We stock the tube and fittings in yellow – for high visibility – or grey.

Other related products

menu

products