HOME products Proxy Products Fiberglass Assemble Roving Roving for Filament Winding&Pultrusion 310H

Roving for Filament Winding&Pultrusion 310H

310H Direct Roving or Assembled Roving is produced by using E6 glass formulation and coated with a silane-based sizing. It is specially designed for the reinforcement of epoxy resin.It is designed for filament winding and pultrusion applications and suitable for use in insulation rods and insulating pipe.

310H offers a fast and complete wet-out of resin. The composites it reinforces have excellent mechanical,electrical insulation and acid corrosion resistance properties.It is suitable for use in UHV and EHV power transmission,transformation and other fields.

Product performance introduction

Product Features

Excellent process performance and low fuzz
Multi-resin compatibility
Excellent mechanical properties of parts, good resistance to heat bending
Excellent chemical corrosion resistance

Specification

Glasstype	E6
Sizingtype	Silane
Typicalfilamentdiameter(μm)	17	24
Typicallineardensity(tex)	1200 2400 9600 19200
Example (Direct Roving)	E6DR24-2400-310H
Example (Assembled Roving)	E6R-19200-310H

Technical Parameters

Item	Linear density variation	Moisture content	Sizing content	Breakage strength
Unit	%	%	%	N/tex
Test menthod	ISO 1889	ISO 3344	ISO 1887	ISO 3341
Standard range	±5(Direct Roving<600 tex)±4(Direct Roving≥600 tex )±4(Assembled Roving)	≤ 0.07	0.55±0.10	≥0.40(<4800 tex) ≥0.30(≥4800 tex)

Mechanical Properties

Mechanical properties	Unit	Value	Resir	Test menthod
Tensile strengtt	MPa (Ksi)	2316	EP	ASTM D2343
Tensile modulus	GPa (Msi)	82.2 (11.9)	EP	ASTM D2343

Instructions

The product is best used within 12 months after production, and should be kept in the original package before use.
Care should be taken when using the product to prevent it from being scratched or damaged.
The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.
When using the product, please control the tension properly and ensure the tension uniformity.

Packaging

For detailed package size information, please download the product manual to view!

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10℃~35℃ and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.

More products in the same series

FIBERGLASS PRODUCTS FOR CONTINUOUS PROFILES

Roving for Filament Winding&Pultrusion 310H

Series :

Fiberglass Assemble Roving >

application

Infrastructure

Glass type :
E6
Sizing type :
Silane
Typical filament diameter (μm) :
17、24
Typical linear density (tex) :
1200、2400、9600、1920
Example (Direct Roving) :
E6DR24-2400-310H
Example (Assembled Roving） :
E6R-19200-310H

inquiry

FAQ

Q : Are you a factory? Where are you located? A : We are manufacturer of FRP grating and pultruded profiles, trader of FRP yarn materials. We are the largest distributor of China Jushi Co. We also sell products of several FRP yarn manufacturers. We are in Anhui, China.
Q : What information is recommended for the inquiry？ A : 1. Which tex you need? 2. What the application you use it for? Or the tecnologh, is weaving, pultrusion or winding? 3. How many quantity do you need? 4. What resin do you combined for? Polyester resin or epoxy resin? 5. Do you need FOB or CIF price, if CIF, please tell us your port.
Q : What's the MOQ? A : Usually 1 Ton
Q : Package & Shipping A : Normal package:carton(Incuded in the unite price) Special Packge: need to charge according the actual situation. Normal shipping :your nominated Freight forwarding.
Q : When can I offer? A : We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
Q : How do you charge the sample fees? A : If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
Q : What's your delivery time for production? A : If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !

Other related products